Search

Help Advanced

Green Building
Requirements
Guidelines

Introduction
Siting and Form

Landscape

Transportation

Envelope and Space Planning
Materials
Water Systems

Electrical Systems
HVAC Systems
Control Systems

Construction Management

Introduction
Reqd/Suggested Practices
Demolition Plan
Reuse Materials
Topsoil/ Trees/ Vegetation
Stormwater Control
Site Waste-Management
Safety Procedures
Reuse Waste
Material-Conservation
Materials On-Site
Pesticides
Low Pollution Equipment
Protect Occupants
Worker Exposure
Procedures Prior Occupancy
Cleaning
Commissioning
Appendices

Case Studies
Additional Resources
Site Map

Crush Waste Concrete & Masonry for Reuse

Crush waste concrete, asphalt and acceptable masonry for use as granular fill and aggregate, or contract with a company that will accept these materials for recycling.

This is best done on site for demolition of buildings and site work on large sites, or where truck access to the site is a problem, since it reduces the volume of materials needing to be trucked.

On smaller sites, contract with a company that will truck materials to a facility with a crusher. Clay brick and clay tile is generally not accepted.

The project engineer and soils consultant must verify specifications of crushed materials to be reused.

Cautions

  • Crushers take space and are very noisy and dusty. They are usually appropriate only on large sites where they can be isolated from close neighbors. Few sites in Santa Monica allow for on-site crushing. There is usually a delivery and minimum set-up cost, as well as an operating cost. Compare the cost of trucking to a crusher site for each project.

 

     

 

 



Home | Whats New | Guidelines in PDF | Site Map  | Design Advisor | Energy Compliance | Contact Us
City of Santa MonicaDesign Credits